Rolled Roofing: Usefulness, Costs & Installation Information (2024 Guide)

Installing Rolled Roofing

The installation process for rolled roofing depends on the type of roof material you’re working with. In most cases, you’ll lay down roofing cement as an adhesive and then roll out the rolled roof material over the cement, cutting it to shape and size as you apply strips.

Many homeowners use roofing nails to secure the rolled roofing material even further. Roofing cement can then be used to seal overlaps between the rolled roofing strips as well as any areas where nails punctured the material.

Most handy DIYers can get a full rolled roof installed in an afternoon, while an asphalt shingle roof can take days to install. This is one of the major upsides to installing rolled roofing, along with the below-average cost.

To learn more about a DIY rolled roofing installation, check out this video: 

What Does Rolled Roofing Cost to Install?

The cost of your rolled roofing project can vary quite a bit based on several factors. These include:

• Labor costs, as a DIY roof replacement can save you several thousands of dollars on labor
• The type of rolled roofing you’re installing
• The size and slope of your roof
• And more

Generally speaking, you can apply rolled roofing to a typical 1,200-square-foot roof for around $1,500, on average, and most prices will fall between $1,200 and $1,750. This includes the materials and tools needed for a proper installation.

If you’re having a roofing contractor install a rolled roof for you, you’ll likely be looking at prices between $2,500 and $4,800. Todd Miller², roofing installer for more than 30 years and President of Isaiah Industries, adds, “If you have more than one layer of existing shingles, removal is necessary,” which can add to the total cost of your project.

Best Overall

4.5/5

Uses eco-friendly materialsWell-trained, certified installersLifetime or lengthy warranty

Get Quote

Most Eco-Friendly

4.5/5

Widespread availabilityFinancing options available10+ years of experience

Get Quote

Types of Rolled Roofing

There are a few different types of rolled roofing, all varying in their durability and efficiency. We’ll briefly explain the different types of rolled roofing below.

Rubber Rolled Roofing

Rubber rolled roofing is the most cost-effective type, and it’s also the most common. You can typically pick up this type of roofing in Home Depot, Lowe’s and other home improvement stores.

Rubber roofing is made out of recycled tires and a mixture of other materials. Durability is decent, and the cost is lower than that of all other rolled roofing materials.

EPDM Rolled Roofing

EPDM (ethylene propylene diene monomer) rubber is another common rolled roofing material. This rubber is also made from recycled materials, and it’s made to be thinner and more lightweight than traditional rubber roofing.

EPDM roofing is highly resistant to heat and UV rays, so it’s more durable than rubber rolled roofing. It also lasts significantly longer — usually around 20 years — but it’s also much more expensive.

Bitumen Rolled Roofing

Bitumen rolled roofing — also called modified bitumen roofing — is made from bitumen, as you might have guessed. Bitumen is another name for asphalt, so this is the same material that goes into making roads and driveways. It’s relatively easy to install, as it typically comes in self-adhesive sheets.

Bitumen rolled roofing is more costly than most other types, but it also lasts for around 20 years on average.

TPO Rolled Roofing

TPO (thermoplastic polyolefin) roofing is made out of polypropylene and ethylene propylene, which typically come from recycled tires. These sheets are highly durable, lasting 20 years or more in most cases.

When you see flat roofs on commercial buildings, TPO rolled roofing is likely what was used. This material is highly resistant to leaking, but it’s more challenging to put down, as it requires the use of a large blow torch.

When Is Rolled Roofing Ideal?

Rolled roofing is most often used on flat or low-pitch roofs, as asphalt shingles that are layered and free-moving don’t offer any protection from roof leaks in these cases.

That being said, rolled roofing is sometimes used by homeowners who prefer to handle their own home improvements, even if it means using rolled roofing on standard pitched roofs.

Rolled roofing is ideal for DIYers, including those without any roofing experience. Even newcomers to roofing can lay down a durable rolled roof in just a day or two with some preparation and instructions.

Rolled roofing is also a common option for outbuildings that are less valuable than primary residences. It’s not uncommon to see this roofing material on sheds or pavilions.

Finally, rolled roofing is perfect for homeowners who need a new roof but don’t want to spend the thousands or tens of thousands the more traditional asphalt roofs or metal roofs would cost them. Rolled roofs won’t last as long, but they’re also far less expensive. You can usually save money in the long run using rolled roofing, even though you’ll need to replace it more often.

Pros and Cons of Rolled Roofing

As is the case with any roofing style, there are some upsides and downsides to using rolled roofing on your home or outbuilding. Some of the more significant benefits of rolled roofing include:

Benefits of Rolled Roofs

•  Affordability: Installing rolled roofing is often less than half the cost of installing an asphalt shingle roof
•  Ease of installation: Rolled roofing is simple to install as a DIY roofing installation project. It’s easy to cut for eaves and ridges, and many options are peel and stick that don’t require any additional tools. Even if you have a professional install it, you’ll likely pay less per square foot for the installation than you would with any other roofing material
•  Ideal for flat roofs: Flat roofs and low-slope roofs often aren’t a good place to install roofing shingles because water can make its way under the individual pieces. Rolled roofing provides a much better solution for these roof types
•  Easily transported: Transporting rolls of rolled roofing is easy, as each roll weighs about 75 to 100 pounds. You can pick up materials from your local home improvement store using your own car, and it’s relatively easy to carry rolls up to your roof for installation. Asphalt shingles are far heavier and usually need to be delivered and lifted up to your roof using heavy machinery.

Downsides of Rolled Roofs

Of course, there are some downsides to using rolled roofing as well, as it’s far from the best roofing style. Some drawbacks of rolled roofing include:

•  Limited durability: Some rolled roofing materials — like EPDM rolls — can last up to 20 years, but the low-cost options last around five to 10 years on average. The lifespan pales in comparison to what you’d expect from asphalt roofs, slate roofs and most other styles.
•  Limited warranty: Due to the fact that it’s less durable than other roofing types, the warranty is usually less appealing.
•  Wears away quickly: Rolled roofing is quite thin and can tear or wear away more rapidly than thicker asphalt shingles. You might need multiple layers of rolled roofing on your home to provide adequate protection, which can drive up your installation price and potentially put your home at risk of damage sooner after installation.
•  Offers less curb appeal than other styles: Most homeowners agree that, unless rolled roofing is installed on a flat roof that isn’t visible from the ground, it’s far less aesthetically pleasing than any other roof material.
•  Adds less value to your home: Since rolled roofing is less visually appealing than other materials and has a shorter lifespan, installing a new roof in this material won’t add as much value to your home as other materials. Additionally, some buyers might be turned off by rolled roofing altogether.
•  Not ideal for solar panel installation: For homeowners looking to install solar panels, avoiding rolled roofing is best. This material only lasts five to eight years in most cases, and removing your panels to replace your roof and reinstall the photovoltaic equipment in this timeframe will get expensive very quickly.

Some homeowners may sacrifice durability to cut down on costs, but industry experts, such as Steve Elliot¹, Franchise Owner of Restoration 1 Minnetonka, warns against this cost-saving tactic:

“One of the most important factors to consider is durability. Look into the type of climate in your area and assess the qualities of the roofing material to understand its resistance, as well as its projected longevity. Also ensure good installation and proper maintenance for your roofing to last a long time.”

Best Overall

4.5/5

Uses eco-friendly materialsWell-trained, certified installersLifetime or lengthy warranty

Get Quote

Most Eco-Friendly

4.5/5

Widespread availabilityFinancing options available10+ years of experience

Get Quote